Take your temperature management measures to the next level
enFlow IV fluid and blood warming system – The right temperature, in the right place, at the right time
The enFlow IV fluid and blood warming system helps maintain patients’ core body temperatures throughout the entire perioperative experience. This capability helps minimize the incidence of patient hypothermia.
The system automatically warms fluids to 40 ± 2 °C with multiple sensors to ensure fluid temperature accuracy.
The enFlow IV fluid and blood warming system helps maintain patients’ core body temperatures throughout the entire perioperative experience.
Mobility
The small single-patient-use cartridge remains in-line for continous patient warming, across the care continuum
Speed
Easy to use, the system rapidly warms fluids to the temperature set point, so you do not need to wait on warming.
Pre-op
Preoperative warming reduces the impact of heat redistribution caused by anesthesia, leading to a more stable core temperature when your patient reaches the postanesthesia care unit (PACU)⁸.
Outpatient procedures
Hypothermic patients, on average, take 40 minutes longer to recover⁵. Hypothermia can occur in up to 90% of all surgeries³. Nearly half of all surgeries are take place in the outpatient setting), it is imperative that patients recover safely and quickly to streamline the demand on surgical services.
PACU
Normothermic patients are less prone to postoperative cardiac events and leave the PACU earlier than those suffering from hypothermia¹¹ ¹².
ER
Each liter of intravenous fluid infused into adult patients at an ambient temperature decreases the mean body temperature by approximately 0.25°C². Trauma patients often arrive in a hypothermic state and continue to lose body heat during examination by healthcare providers. Warming blood and IV fluids will help maintain normothermia, which can reduce the risks associated with a core temperature below 36°C⁹.
ICU
Hypothermia reduces resistance to surgical wound infections² ¹³ ¹⁴. Fluids or blood may continue to be delivered in the ICU where patients remain at risk from the effects of hypothermia.
Labor and delivery
Studies looking at the impact of perioperative warming on women undergoing cesarean delivery with epidural anesthesia found that maternal and fetal hypothermia were prevented, maternal shivering was reduced and umbilical vein pH was improved¹⁰.
Transport
The enFlow system is small, designed to be easy to transport along with the patient as they move from department to department throughout the hospital.
Service is essential to keep medical equipment operational and safe. Our Nordic service team consists of experienced service technicians stationed across the Nordic countries. Our service technicians are ready to take on your every service need.”
The syringe infusion pump from arcomed´s Chroma Series is an all-in-one infusion pump that meets all your anaesthesia needs. Syramed can be used as a total intravenous anaesthesia pump (TIVA) or target controlled infusion pump (TCI) in the OR. It can follow the patient to the recovery room and be used as a patient controlled analgesia (PCA) pump or be used as a standard infusion pump in the ICU and in general wards – and more.
Syringe pumps are used to administer medication that have very small hourly volumes. Syramed high-quality syringe infusion pump improves patient treatment by increasing safety in procedures and simplifying workflow for nurses. Syramed is user-friendly and intuitive and fulfil the sophisticated needs of hospitals with the same external shape, interface, design and functionality for both syringe and volumetric pumps. Syringe infusion pumps from arcomed are known for simple construction and user-friendly core features when delivering continuous and very specific amounts of fluids at the rates the patient acquires
Nasal PAP ventilation system
The SuperNO2VA nasal PAP ventilation system uses the flow from any oxygen source. Delivers positive airway pressure to stent open the upper airway, allowing for the preoperative delivery of positive pressure ventilation and oxygen for patients with a decreased level of consciousness. The SuperNO2VA™ nasal PAP ventilation device is available in medium and large sizes and is offered as a standalone mask with a head strap and as a system, kitted with a hyperinflation bag. These configurations offer flexibility as it allows the SuperNO2VA™ nasal PAP ventilation device to be used with either an anesthesia machine or with only an oxygen flow meter.
Anesthesia breathing circuit and kits
Limb-O™ single limb anesthesia breathing circuit and kits. Each Limb-O™ circuit is divided by a flexible septum running the length of the tube. Limb-O™ effectively transfers heat from the expiratory to the inspiratory side of the circuit. Increased thermal efficiency rates during surgery keeps gases warm and body temperature normothermic.
Less weight means less torque on the ET tube and less plastic is being used. Decreased compliance helps lead to accurate delivered volume. Accomplish more with less as the single limb design services pediatric through adult patients. Limb-O™ as all Vyaire circuits are made without latex.
Phototherapy positioning aid
Effectiveness – combined with security and stability with our Bilitex positioning aid specifically developed for phototherapy. The little patients are prone to stretch patterns and nervous movements, particularly during therapeutic phases. This is due to lack of muscle tone and the unbounded surroundings, which cost a lot of energy. With the Bilitex positioning aid, the preemie experiences a secure and flexible environment during therapy, which allows the infant to adopt a relaxing position.
The innovative textile material features a special mesh structure with 85% permeability to the high-intensity radiation spectrum. In addition, the knit fabric is very soft and breathable – the desired size can be individually adjusted using a flexible closure (Velcro®). The product is developed in cooperation with the University Hospital in Tubingen. It is tested and certified according to Oeko-Tex®Standard 100.
Timik AB
Hammarbacken 4A
191 40 Sollentuna
Tel: + 46 (0)8 35 15 00
Org.nr 556968-6537
enFlow Brochure
